The use of activated carbon in the fish tank acrylic has an impact on the fish?
Small partners who use acrylic fish in fish tanks all know that if we want to remove the fishy smell and some hard water quality of the aquarium when using the aquarium, we need to put activated carbon into the aquarium. The key point of the aquarium is the reflection of fashionable life concept, and the high quality of daily life is reflected in every unintentional key point.
Release time:
2021-03-18
UseFish tankAcrylicFish farming partners all know that if we want to remove the fishy smell and some hard water quality of the aquarium when we apply the aquarium, we need to put activated carbon into the aquarium. The key point of the aquarium is the reflection of fashionable life concept, and the high quality of daily life is reflected in every unintentional key point.
Many fish farming partners will have a doubt, into the aquarium into the activated carbon will harm the health of the fish? What are the common problems about the use of activated carbon?
1. Has the application of activated carbon affected the physical and mental health of the fish? No, it is beneficial but harmless. To watch the fish tank, you need to polish and smooth the edge of the laminated glass with sanding paper, and clean it up with a dry towel. There are two ways to bond glass lenses: 1. When bonding 0.5cm laminated glass, first arrange the positions of several pieces of laminated glass, then squeeze glass glue between the joints one by one, and slowly scrape the glue with fingers or wood boards to make the colloid solution penetrate into the gaps. 2. When gluing laminated glass of 0.8cm or more, first squeeze the glass strip on one of the two pieces of laminated glass that must be glued, then put the other piece of laminated glass in, and use the appropriate range to make the middle of the laminated glass inseparable.
Can the activated carbon be placed directly in the fish tank? Yes, and it will not cause harm to the fish, but the activated carbon will be more likely to fail if it is in such an environment for a long time.
3. How to use fish tank activated carbon? First put it under the filter cotton, so that its efficacy can be maintained more durable, fish tank manufacturers tempered laminated glass is to heat the laminated glass to a soft point, followed by a large air-cooled type of a high-strength safety glass. Under the same thickness, the tensile strength of tempered glass is 4-5 times higher than that of ordinary glass, and the impact compressive strength is 5 times higher than that of ordinary glass. The heat resistance level of tempered laminated glass is strong, and it can bear strong temperature transition without destruction. Usually once a month, the placement order is filter cotton-glass fiber reinforced plastic ring or biochemical ball-activated carbon-filter cotton.
4. How can the water be mixed after the new activated carbon is put into the fish tank? Before application, the smoke should be cleaned and screened out, otherwise the gray black smoke will temporarily endanger the cleanliness of the water body, but it is not necessary to wash it with fresh drinking water immediately. Due to the multi-porosity of activated carbon, once chlorine and its bleaching solution in many drinking water are adsorbed, it will cause damage to the water body when it is subsequently placed in a filtration device.
5. How to store it if you don't use it? Wash it first, dry it, and place it in a shady area. Before the next application, you need to use 100 grams of salt to soak for 15 to 30 minutes, and each cleaning must have these processes.
Aquarium acrylic
Previous Page
Previous Page
Latest information
WhatsApp: 8615371043985
Add: CAI Xi Group, CAI Xiang Village, Jichuan Street, Taixing City, Jiangsu Province, China