Acrylic swimming pool cleaning and maintenance matters needing attention
Regular maintenance, cleaning and maintenance of acrylic swimming pools can appropriately increase their service life, but many people know little about the maintenance and cleaning of acrylic swimming pools.
Release time:
2022-11-14
Periodicallyacrylic swimming poolMaintenance, cleaning and maintenance can appropriately increase its service life, but many people know little about the maintenance and cleaning of acrylic swimming pools.
1. acrylic swimming pool maintenance matters needing attention
1, do not use detergent powder to wipe the swimming pool. The decontamination powder will corrode the surface and reduce the brightness.
2. It is strictly forbidden to use sharp objects or abrasive articles to wipe the surface of the swimming pool.
3. After the swimming pool is installed in an underwater, the silica gel takes 24 hours to improve curing. Do not use it during this period of time, otherwise it will cause water leakage.
4. It is strictly prohibited to place bulbs, open flames and high-temperature objects connected to the power supply in the pool, otherwise it will leave scars or cause deformation of the pool.
5. Avoid contact with strong organic solvents such as paints, volatile agents, thinners, etc., otherwise we may need to cause cell surface softening, dissolution, cracking and other phenomena that endanger the quality of enterprise products and services.
6, it is strictly prohibited to add boiling water directly to the swimming pool. When swimming, please put cold water before heating. Acrylic material products begin to soften when heated to 100 degrees, so avoid storing and using in high temperature working environment above 60 degrees.
7, strict use of strong corrosive chemical liquids (such as sulfuric acid, hydrochloric acid, lye) wipe, pool surface and hardware accessories can not use 84 strong corrosive disinfectant disinfection. Disinfection or other physical disinfection methods.
2. acrylic swimming pool cleaning precautions
1, weekly cleaning acrylic swimming pool when using sponge or flannel, do not through the use of coarse cloth, do not because the use of any kind of detergent containing granular objects, avoid direct sunlight and high temperature environment contact. After each water change, rinse the children's pool thoroughly with water and dry it with a soft cloth. Use a mild detergent when cleaning, do not use abrasive detergent, you can also use glass water to clean.
2, timely repair scratches. Do not bump or impact the surface with hard objects, causing bumps or scratches. If you are not careful, there will be some scratches, you can use 2000c water sandpaper to polish, and then use traditional toothpaste and soft cloth to polish.
3. Deal with the blockage of the pipeline at any time, use special pipeline cleaner, and disinfect the pipeline and sewer pipeline on time. It is recommended to clean the pipes once or twice a month to remove odors and prevent the growth of bacteria.
Acrylic swimming pool
Previous Page
Previous Page
Latest information
WhatsApp: 8615371043985
Add: CAI Xi Group, CAI Xiang Village, Jichuan Street, Taixing City, Jiangsu Province, China