acrylic swimming poolRepair mainly has the following methods:

1. Patching. This is a common patching method, as follows:

(1) clean the damage, remove stains and impurities.

(2) Pretreatment of the patch, coating adhesive on one side, applying semi-dry adhesive to the repair place, and then sealing and reinforcing with clean glass cloth or wool.

(3) Extend the edge and circumference of the patch at least 2 inches, and smooth the corners.

(4) Fix the patch, brush the adhesive on the back of the patch, press it to the surface of the repair, and press it for at least 2 hours.

(5) Do secondary reinforcement at the end and corner of the patch to prevent leakage.

2. Hot melt repair. Use hot melt adhesive and similar plastic repair strips to repair at 200°C in a molten state to achieve welding effect. The specific steps are similar to the patching method.

3. Surface painting repair. For small surface damage, liquid acrylic or acrylic ester can be directly applied to repair, and 2-3 layers can be applied to the repair place after surface friction.

4. Flip repair. For swimming pools with large damage, the surface of the pool wall can be turned over to expose the inner surface without damage, and then the damaged surface can be patched and turned back to its original position. This requires structural reinforcement of the swimming pool.

5. Local supplementary method. Remove the surface impurities of the damaged area, brush the deepening agent on the inner surface, and then cut the acrylic plate of appropriate size to supplement, and repair it by bonding and forming on both sides.

In summary, acrylic swimming pool repair mainly uses patching, hot melt, surface coating and flip and other methods. According to the different degree of damage, choose different repair scheme, patch material with the same type of plastic is appropriate, and combined with deepening agent or glass cloth for reinforcement, to ensure the quality of repair. Regularly check the repair effect to ensure the safe use of the swimming pool.